Specifications
SI Series Aluminum Alloy Double Acting Compressed Standard Pneumatic Air Cylinder
The cylinder is in accordance with the ISO15552.
The piston seal adopts two NBR+PA material asY type one-way sealingstructurewith compensationfunction, long service life and low startingpressure.
The rod seal uses PU material with the characteristicsof high strength, good toughness, wear resistance,oil resistance and aging resistance.
The piston rod material is made by 45C CarbonSteel with hard chrome plating on the surface,and the roughness Ra<0.4, with good wearresistance and rust resistance.
Number | Name | Number | Name |
1 | Piston rod | 8 | Piston |
2 | Hexagon nut | 9 | Y ring |
3 | Shaft seal | 10 | Magnet |
4 | Front cover | 11 | Anti-friction ring |
5 | Copper tube | 12 | Barrel |
6 | Cushion adjust screw | 13 | Back cover |
7 | Cushion seal | 14 | O ring |
Dimensions
Bore (mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 |
Operation | Double Acting | ||||||
Working Medium | Air | ||||||
Mountings | BasicFA FB CA CB LB YB | ||||||
Operating Pressure Range | 1~9.0 Kgf/cm2 | ||||||
Proof Pressure | 13.5 Kgf/cm2 | ||||||
Operating Temperature Range | -20~80℃ | ||||||
Operating Speed Range | 50~800mm/s | ||||||
Cushion | Adjustable Cushion | ||||||
Adjustable Cushion Stroke | 20 mm | 26 mm | |||||
Port Size | G1/8″ | G1/4″ | G3/8″ | G1/2″ |